- 您现在的位置：买卖IC网 > Sheet目录961 > ARS14Y4H (Panasonic Electric Works)RELAY RF SPDT 500MA 4.5V
RS (ARS)
NOTES
1. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
Single side stable silent type
Humidity, %R.H.
85
Tolerance range
(Avoid freezing (Avoid
when used at condensation
*Relays are in?uenced by the type of PC
board used. Please con?rm with the
actual PC board you plan to use.
*Please avoid re?ow soldering.
2) Surface-mount terminal
In case of automatic soldering, the
following conditions should be observed
different. The nominal operating voltage
should be applied to the coil for more
than 30 ms to set/reset the latching type
relay.
2. Coil connection
temperatures
lower than
0 ° C 32 ° F )
-40
-40
5
when used at
temperatures
higher than
0 ° C 32 ° F )
0 60
32 140
Temperature, ° C ° F
(1) Position of measuring temperature
A
T 2 =230 ° C and higher
1.5 +0.1 dia.
2.0 1.75 8.3 .339
16.0 .079 .069 .327
RS relay 12.0 .630 4.0
.472
.016
When connecting coils, refer to the wiring
diagram to prevent mis-operation or
malfunction.
3. External magnetic ?eld
Since RS relays are highly sensitive
polarized relays, their characteristics will
be affected by a strong external magnetic
?eld. Avoid using the relay under that
condition.
4. Cleaning
For automatic cleaning, the boiling
method is recommended. Avoid
ultrasonic cleaning which subjects the
relays to high frequency vibrations, which
may cause the contacts to stick.
It is recommended that alcoholic solvents
be used.
5. Conditions for operation, transport
and storage conditions
1) Temperature
? Single side stable standard and latching
type: –40 to 70 ° C –40 to 158 ° F
? Single side stable silent type:
–40 to 60 ° C –40 to 140 ° F
2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
3) Atmospheric pressure: 86 to 106 kPa
Temperature and humidity range for
usage, transport, and storage:
Single side stable standard
and latching type
Humidity, %R.H.
4) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
5) Freezing
Condensation or other moisture may
freeze on the relay when the temperature
is lower than 0 ° C 32 ° F . This causes
problems such as sticking of movable
parts or operational time lags.
6) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
7) Storage requirements
Since the relay is sensitive to humidity,
the surface-mount type is packaged with
tightly sealed anti-humidity packaging.
However, when storing, please be careful
of the following.
(1) Please use promptly once the anti-
humidity pack is opened.
If relays are left as is after unpacking,
they will absorb moisture which will result
in loss of air tightness as a result of case
expansion due to thermal stress when
re?ow soldering during the mounting
process. (within one day, 30 ° C and
60%R.H or less)
(2) When storing for a log period after
opening the anti-humidity pack, storage
A: Surface of PC board where relay is mounted.
(2) IR (infrared re?ow) soldering method
T 3
T 1 =150 to 180 ° C
T 2
T 1 T 3 =250 ° C max.
t 1 =60s to 120s
t 2 =within 30s
t 1 t 2
? Mounting cautions
Rise in relay temperature depends
greatly on the component mix on a given
PC board and the heating method of the
re?ow equipment. Therefore, please test
beforehand using actual equipment to
ensure that the temperature where the
relay terminals are soldered and the
temperature at the top of the relay case
are within the conditions given above.
3) Please meet the following conditions if
this relay is to be soldered by hand.
(1) 260 ° C 500 ° F for max. 10 seconds
(2) 350 ° C 662 ° F for max. 3 seconds
The effect on the relay depends on the
actual substrate used. Please verify the
substrate to be used.
(3) Avoid ultrasonic cleaning. Doing so
will adversely affect relay characteristics.
Please use alcohol-based cleaning
solvents when cleaning relays.
7. Tape and reel packing
1) Tape dimensions
8.6
0
.059 +.004 dia.
0.4
.157
85
Tolerance range
in anti-humidity packaging with an anti-
humidity bag to which silica gel has been
added, is recommended.
X type
Relay polarity bar
11.5
.453
15.00
.591
24.0 ± 0.3
.945 ± .012
(Avoid freezing
when used at
temperatures
(Avoid
condensation
when used at
*Furthermore, if the relay is solder
mounted when it has been subjected to
Z type
Tape coming out direction
(General tolerance: ± 0.1 ± .004 )
21 dia.
.827 dia.
14.961 dia.
80 ± 1 dia.
3.150 dia.
lower than
0 ° C 32 ° F )
-40
-40
5
temperatures
higher than
0 ° C 32 ° F )
0 70
32 158
Temperature, ° C ° F
excessive humidity, cracks and leaks can
occur. Be sure to mount the relay under
the required mounting conditions.
6. Soldering
1) Please meet the following conditions if
this relay is to be automatically soldered.
(1) Preheating: Max. 120 ° C 248 ° F
(terminal solder surface) for max. 120
2) Dimensions of plastic reel
± 0.8
± .031
2.0 ± 0.5
.079 ± .020
380 ± 2 dia.
± .079
± .039
seconds
13 dia.
(2) Soldering: Max. 260 ± 5 ° C 500±9°F for
max. 6 seconds
± 0.2
.512 ± .008 dia. 24.4 +2.0
.961 +.079
2.0 ± 0.2
.079 ± .008
ASCTB106E 201202-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
ARX124H
RELAY RF SPDT 500MA 4.5V
ARXP104H
RELAY RF SPDT 500MA 4.5V
AS-5042-A
SLIDE FULL EXTENSION 20" PAIR
AS1100 DB
BOARD DEMO AS1100
AS1107 DB
BOARD DEMO AS1107
AS1109 EB
BOARD EVAL AS1109
AS1110 EB
BOARD EVAL AS1110
AS1112 EB
BOARD EVAL AS1112
相关代理商/技术参数
ARS14Y4HX
功能描述:RF Relay SPDT (1 Form C) Surface Mount 制造商:panasonic electric works 系列:ARS 包装:带卷（TR） 零件状态:有效 继电器类型:RF 线圈类型:无锁存 线圈电流:44.4mA 线圈电压:4.5VDC 触头外形:SPDT（1 C 型） 额定接触（电流）:500mA 开关电压:30VDC - 最大 导通电压（最大值）:3.38 VDC 关闭电压（最小值）:0.45 VDC 工作时间:10ms 释放时间:6ms 特性:- 安装类型:表面贴装 端子类型:鸥翼型 触头材料:镀金 线圈功率:200 mW 线圈电阻:101.3 欧姆 工作温度:-40°C ~ 70°C 标准包装:500
ARS14Y4HZ
功能描述:RF Relay SPDT (1 Form C) Surface Mount 制造商:panasonic electric works 系列:ARS 包装:带卷（TR） 零件状态:有效 继电器类型:RF 线圈类型:无锁存 线圈电流:44.4mA 线圈电压:4.5VDC 触头外形:SPDT（1 C 型） 额定接触（电流）:500mA 开关电压:30VDC - 最大 导通电压（最大值）:3.38 VDC 关闭电压（最小值）:0.45 VDC 工作时间:10ms 释放时间:6ms 特性:- 安装类型:表面贴装 端子类型:鸥翼型 触头材料:镀金 线圈功率:200 mW 线圈电阻:101.3 欧姆 工作温度:-40°C ~ 70°C 标准包装:500
ARS1505
制造商:MIC 制造商全称:MIC GROUP RECTIFIERS 功能描述:BUTTON AUTOMOTIVE RECTIFIER
ARS151
制造商:MIC 制造商全称:MIC GROUP RECTIFIERS 功能描述:BUTTON AUTOMOTIVE RECTIFIER
ARS1512
功能描述:高频/射频继电器 ARS (RS) High Frequency Relay
RoHS:否 制造商:Omron Electronics 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 VDC 线圈类型:Non-Latching 频率: 功耗:100 mW 端接类型:Solder Terminal 绝缘:20 dB to 30 dB at 1 GHz 介入损耗:0.2 dB at 1 GHz
ARS152
制造商:MIC 制造商全称:MIC GROUP RECTIFIERS 功能描述:BUTTON AUTOMOTIVE RECTIFIER
ARS154
制造商:MIC 制造商全称:MIC GROUP RECTIFIERS 功能描述:BUTTON AUTOMOTIVE RECTIFIER
ARS154H
功能描述:高频/射频继电器 ARS (RS) High Frequency Relay
RoHS:否 制造商:Omron Electronics 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 VDC 线圈类型:Non-Latching 频率: 功耗:100 mW 端接类型:Solder Terminal 绝缘:20 dB to 30 dB at 1 GHz 介入损耗:0.2 dB at 1 GHz